Annie's Christmas Tree Skirt
Christmas Tree Skirt how to:
To make this very easy but 'complicated looking' tree skirt, you will need this wedge ruler and 140 charm squares.
This one is by Omnigrid and is a 9 degree Circle Wedge. I've had it forever.
I made this tree skirt from 4 charm packs of Jovial that had 42 squares each.
Charms packs come in a variety of counts, so that will determine the number of packs you will need.
Arrange your squares in columns of 5 squares each. You need a total of 28 columns. Play with them until you have an arrangement that is pleasing to your eye.
Stitch each of the 28 columns into strips of the 5 squares top to bottom. 1/4" seam allowances throughout. Press your seams all in the same direction for all strips. All pressed toward the top or all toward the bottom...it doesn't matter which direction you choose, just press them all the same direction. Keep them in your arranged order as you sew and press them. You just won't believe how quickly this will be completed.
Now for cutting. Take your first strip and place the wedge ruler aligned with the bottom of the strip ...
and aligned at the right hand edge of your strip.
Left handers can do the opposite, it won't matter, just cut them all the same way each time.
This wedge ruler will be about 3/4" shorter than your strip. When you rotary cut along the wedge just continue the cut to the edge of the strip without moving the ruler. It will work fine...it did for me every time. Don't stop at the end of the ruler to think about it, just continue the cut until you are off the fabric strip.
If possible, cut one side and walk around to cut the other side without moving the ruler. It's not necessary to cut the wedge this way, but it's quicker if you don't have to turn the fabric and re-align the ruler for the second cut. For the second cut you will be starting with the narrow end that doesn't reach the edge of your fabric. I aligned my cutter with the ruler about 3" from the end and cut pulling backwards to the end of the fabric. Then realign your cutter in that cut to cut the rest of the wedge as normal.
If you trim your strip at the end of the wedge ruler, nothing bad will happen. You will simply have a larger opening when your strips are all sewn together in a circle. In the end I trim my opening larger anyway, but it is quicker to do it in the end than it is to trim every single strip wedge as I go.
You will now have these slices from your strip.
You will discard the slice on the right (the one with the very pointy tip) to your scrap collection.
The slice on the left will be flipped so that both wide ends are adjacent as shown below. This is how they will be sewn together and you will note that every other wedge now has the seams pressed in opposite directions so they can be butted when the wedges are sewn together...cool, huh?
As you get the wedges cut, keep the wider wedges in the order you arranged them in. You'll need to find a layout that again is pleasing to your eye that includes the narrower wedges between the wider ones.
Begin sewing a wide wedge to a narrow wedge.
Press your seams toward the wide wedge. This will help avoid bulk in the center at the narrow tips, because the narrow tips will disappear to nothing.
Then sew all your wedges together.
Half way together...
Full circle...yeah! Do not sew the very last seam where the ends of your circle meet.
You will only use 27 of your 28 wide wedges, and you will use all 28 of your narrow wedges. Your tree skirt will meet at two narrow wedges which is where you will leave your opening. You probably started sewing your wedges together beginning with a wide wedge, so you will need to add your last narrow wedge to the beginning of your circle.
This tree skirt has no batting. I didn't really want the thickness nor stiffness of a batted quilt. I wanted a very drapable skirt. I considered adding a layer of muslin inside, but finally decided on just the pieced top and a backing.
You can purchase extra wide fabric for a whole un-pieced back. I just went with one and three quarters (1-3/4) yards of a 44-45" wide coordinating fabric and pieced the section that extended past the width of the skirt.
Just like you do with layering a quilt with batting, layer the fabrics with wrong sides together and pin baste. It doesn't really show in the photo but this tree skirt is loaded with safety pins. Cut a slit in the backing fabric where you have left the circle open. Then trim the excess backing fabric away following the outside edge of your pieced top. You can trim the inside circle as well or wait if you decide you want the center opening larger.
I did want the center opening larger so I traced around a whipped topping lid. It seems like a good size.
Because the skirt could now be 'stretchable' as you continue to work with it, I suggest that you stay-stitch the raw edges at about an 1/8 inch from the edge all the way around the skirt.
I didn't want the skirt to be like a bubble with the front and back floating separately. I did faux quilting with stitch in the ditch along the length of each wedge.
In the above photo you see horizontal top stitching. I removed that stitching...it didn't look good...and went with the stitch in the ditch along the lengths of the wedges instead.
Then I added a narrow binding.
The binding is cut on the straight of grain. It is NOT on the bias.
All done!
This tree skirt is an early gift, so I stamped and stitched a tag for it.
Yeah! another gift crossed off the list!
Alternative finishing options:
You can easily add batting for a traditional quilted skirt. You could also lay the top and backing right sides together to stitch around the outside leaving an opening and turn the skirt right side out for enclosed seams. You wouldn't need all that pin basting for that. You could also add lace or a ruffle to the outer edge if you so desire.
As well, this tree skirt can be made for your smaller holiday trees...your Easter egg tree, your creepy Halloween tree, even that wedding money tree. Just cut your wedges from a shorter charm strip and using the narrower end of the wedge.
Design Disclosure Statement:
As far as I know this is my own design. I don't think anyone would publish a mathematically incorrect pattern design. Mathematically incorrect because the narrow wedge has one angled side while the other side is straight. I just hoped they would all go in a circle the way I wanted them to and I was so not disappointed.
As with any of my tutorials that you might give a try, if you have any questions at all, please do not hesitate to contact me. I'd be more than happy to help you.
There are so many possibilities for fabric arrangements for this skirt that I'd love to see yours when you have it together...seriously, I would.
Have fun, Annie
